SAK F46 Turbo Kit

SAK F46 Turbo Kit 

Included in this Turbo Kit:

1 x SAK F46 Turbo (45.5mm)
1 x SAK Install Kit (Gaskets, Dump Pipe Flange)
1 x SAK Oil Feed Line and Oil Return Fittings 

Description

If you are looking for a turbo with more boost than an F44 turbo, but also want to minimise lag, then look no further than the SAK F46 Turbo. This turbo exhibits the perfect balance between low down and mid-range boost performance.

The SAK F46 is a gated turbo that is designed to produce up to 40-50psi of boost in the low-mid RPM range - suitable for high performance and touring. Pair with an intercooler and upgraded injector nozzles for solid power gains.

 Specifications

• 45mm front / 45mm rear
• 12 blade turbine
• 6 blade compressor
• RHF4 flange
• Waste Gate Actuator (fully assembled)
• 40-50psi recommended
• Suits 4cyl Diesel Engines

Compatible Vehicles

• Rodeo RA7 2007 - 2008 (4JJ1)
• RC Colorado 2008 - 2011 (4JJ1)*
• RG Colorado 2012 - 2020 (4JJ1)*
• Isuzu D-Max 2008 - 2020 (4JJ1)*
• Isuzu MU-X 2013 - 2020 (4JJ1)*

*If fitting the SAK F46 to a factory 4JJ1 VNT/VGT exhaust manifold, the turbo flange boltholes may need to be cut on one side of the flange to align the factory boltholes. Alternatively, the stock manifold can be drilled and tapped, or an adaptor plate can be used. 

#4JJ1 #4J #4JJ3 #Isuzu #hilux #1kd #Patrol #engine swap #F44